Harmonized System Code lookup and finder

Your HS codes determine your compliance, your admissibility, and which supply chain advantages you can capture. See how precision classification can protect your finances and unlock greater strategy.

U.S. Harmonized Tariff Schedule

HS Code 73

Articles of iron or steel

CHAPTER 73

articles of iron or steel

73-1

Notes

1. In this chapter the expression "cast iron" applies to products obtained by casting in which iron predominates by weight over each of the other elements and which do not comply with the chemical composition of steel as defined in Note 1(d) to chapter 72.
2. In this chapter the word "wire" means hot- or cold-formed products of any cross-sectional shape, of which no cross-sectional dimension exceeds 16 mm.

Additional U.S. Notes

1. For the purposes of heading 7304 or 7306, the rate of duty "Free (C)" appearing in the "Special" subcolumn applies only to tubes and pipes with attached fittings, suitable for conducting gases or liquids.
2. For the purposes of subheading 7307.19.30, the expression "ductile fittings" refers to fittings which contain over 2.5 percent carbon and over 0.02 percent of magnesium or of magnesium and cerium, by weight.

Statistical Note

1. For the purposes of statistical reporting numbers 7310.10.0005, 7310.29.0020 and 7310.29.0055, “refillable stainless steel kegs, whether or not pressurized” refers to cylindrical kegs for liquid beverages, each keg with a domed top and bottom and a single neck piece, designed for a coupler (valve) system and an extractor tube (spear) by which the keg can be cleaned, filled and dispense the liquid contents.

Don't understand?

Check out our product classification page.

U.S. Tariff Rates

U.S. tariff rates for HS Code 73: Articles of iron or steel
Heading / Subheading	Article Description	Unit of Quantity	General	Special
7301	Sheet piling of iron or steel, whether or not drilled, punched or made from assembled elements; welded angles, shapes and sections, of iron or steel
7301.10.00.00	Sheet piling	kg	Free
Calculate duties for this HTS code
7301.20	Angles, shapes and sections
7301.20.10.00	Of iron or nonalloy steel	kg	Free
Calculate duties for this HTS code
7301.20.50.00	Of alloy steel	kg	Free
Calculate duties for this HTS code
7302	Railway or tramway track construction material of iron or steel, the following: rails, check-rails and rack rails, switch blades, crossing frogs, point rods and other crossing pieces, sleepers (cross-ties), fish-plates, chairs, chair wedges, sole plates (base plates), rail clips, bedplates, ties and other material specialized for jointing or fixing rails
7302.10	Rails
7302.10.10	Of iron or nonalloy steel		Free
	New
	Not heat treated
7302.10.10.10	Standard tee rails over 30 kg per meter	kg
Calculate duties for this HTS code
	Other
7302.10.10.15	Over 30 kg per meter	kg
Calculate duties for this HTS code
7302.10.10.25	Other	kg
Calculate duties for this HTS code
	Heat treated
7302.10.10.35	Standard tee rails over 30 kg per meter	kg
Calculate duties for this HTS code
	Other
7302.10.10.45	Over 30 kg per meter	kg
Calculate duties for this HTS code
7302.10.10.55	Other	kg
Calculate duties for this HTS code
	Used
7302.10.10.65	Railway rails for rerolling	kg
Calculate duties for this HTS code
7302.10.10.75	Other	kg
Calculate duties for this HTS code
7302.10.50	Of alloy steel		Free
7302.10.50.20	New	kg
Calculate duties for this HTS code
	Used
7302.10.50.40	Railway rails for rerolling	kg
Calculate duties for this HTS code
7302.10.50.60	Other	kg
Calculate duties for this HTS code
7302.30.00.00	Switch blades, crossing frogs, point rods and other crossing pieces	kg	Free
Calculate duties for this HTS code
7302.40.00.00	Fish-plates and sole plates	kg	Free
Calculate duties for this HTS code
7302.90	Other
7302.90.10.00	Sleepers (cross-ties)	kg	Free
Calculate duties for this HTS code
7302.90.90.00	Other	kg	Free
Calculate duties for this HTS code
7303.00.00	Tubes, pipes and hollow profiles, of cast iron		Free
7303.00.00.30	Soil pipe	kg
Calculate duties for this HTS code
7303.00.00.60	Pressure pipe with an inside diameter of less than 356 mm	kg
Calculate duties for this HTS code
7303.00.00.90	Other	kg
Calculate duties for this HTS code
7304	Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel
	Line pipe of a kind used for oil or gas pipelines
7304.11.00	Of stainless steel		Free
7304.11.00.20	Having an outside diameter not exceeding 114.3 mm	kg
Calculate duties for this HTS code
7304.11.00.50	Having an outside diameter exceeding 114.3 mm but not exceeding 406.4 mm	kg
Calculate duties for this HTS code
7304.11.00.80	Having an outside diameter exceeding 406.4 mm	kg
Calculate duties for this HTS code
7304.19	Other
7304.19.10	Of iron or nonalloy steel		Free
7304.19.10.20	Having an outside diameter not exceeding 114.3 mm	kg
Calculate duties for this HTS code
7304.19.10.30	Having an outside diameter exceeding 114.3 mm but less than 215.9 mm	kg
Calculate duties for this HTS code
	Having an outside diameter of 215.9 mm or more but not exceeding 406.4 mm
7304.19.10.45	Having a wall thickness less than 12.7 mm	kg
Calculate duties for this HTS code
7304.19.10.60	Having a wall thickness of 12.7 mm or more	kg
Calculate duties for this HTS code
7304.19.10.80	Having an outside diameter exceeding 406.4 mm	kg
Calculate duties for this HTS code
7304.19.50	Of other alloy steel		Free
7304.19.50.20	Having an outside diameter not exceeding 114.3 mm	kg
Calculate duties for this HTS code
7304.19.50.50	Having an outside diameter exceeding 114.3 mm but not exceeding 406.4 mm	kg
Calculate duties for this HTS code
7304.19.50.80	Having an outside diameter exceeding 406.4 mm	kg
Calculate duties for this HTS code
	Casing, tubing and drill pipe, of a kind used in drilling for oil or gas
7304.22.00	Drill pipe of stainless steel		Free
	Having an outside diameter not exceeding 168.3 mm
7304.22.00.30	Having a wall thickness not exceeding 9.5 mm	kg
Calculate duties for this HTS code
7304.22.00.45	Having a wall thickness exceeding 9.5 mm	kg
Calculate duties for this HTS code
7304.22.00.60	Having an outside diameter exceeding 168.3 mm	kg
Calculate duties for this HTS code
7304.23	Other drill pipe
7304.23.30.00	Of iron or nonalloy steel	kg	Free
Calculate duties for this HTS code
7304.23.60	Of alloy steel		Free
	Having an outside diameter not exceeding 168.3 mm
7304.23.60.30	Having a wall thickness not exceeding 9.5 mm	kg
Calculate duties for this HTS code
7304.23.60.45	Having a wall thickness exceeding 9.5 mm	kg
Calculate duties for this HTS code
7304.23.60.60	Having an outside diameter exceeding 168.3 mm	kg
Calculate duties for this HTS code
7304.24	Other, of stainless steel
	Casing
7304.24.30	Threaded or coupled		Free
	Having an outside diameter less than 215.9 mm
7304.24.30.10	Having a wall thickness less than 12.7 mm	kg
Calculate duties for this HTS code
7304.24.30.20	Having a wall thickness of 12.7 mm or more	kg
Calculate duties for this HTS code
	Having an outside diameter of 215.9 mm or more but not exceeding 285.8 mm
7304.24.30.30	Having a wall thickness less than 12.7 mm	kg
Calculate duties for this HTS code
7304.24.30.40	Having a wall thickness of 12.7 mm or more	kg
Calculate duties for this HTS code
7304.24.30.45	Having an outside diameter exceeding 285.8 mm but not exceeding 406.4 mm	kg
Calculate duties for this HTS code
7304.24.30.80	Having an outside diameter exceeding 406.4 mm	kg
Calculate duties for this HTS code
7304.24.40	Other		Free
	Having an outside diameter less than 215.9 mm
7304.24.40.10	Having a wall thickness less than 12.7 mm	kg
Calculate duties for this HTS code
7304.24.40.20	Having a wall thickness of 12.7 mm or more	kg
Calculate duties for this HTS code
	Having an outside diameter of 215.9 mm or more but not exceeding 285.8 mm
7304.24.40.30	Having a wall thickness less than 12.7 mm	kg
Calculate duties for this HTS code
7304.24.40.40	Having a wall thickness of 12.7 mm or more	kg
Calculate duties for this HTS code
	Having an outside diameter exceeding 285.8 mm but not exceeding 406.4 mm
7304.24.40.50	Having a wall thickness less than 12.7 mm	kg
Calculate duties for this HTS code
7304.24.40.60	Having a wall thickness of 12.7 mm or more	kg
Calculate duties for this HTS code
7304.24.40.80	Having an outside diameter exceeding 406.4 mm	kg
Calculate duties for this HTS code
7304.24.60	Tubing		Free
	Having an outside diameter not exceeding 114.3 mm
7304.24.60.15	Having a wall thickness not exceeding 9.5 mm	kg
Calculate duties for this HTS code
7304.24.60.30	Having a wall thickness exceeding 9.5 mm	kg
Calculate duties for this HTS code
7304.24.60.45	Having an outside diameter exceeding 114.3 mm but less than 215.9 mm	kg
Calculate duties for this HTS code
7304.24.60.60	Having an outside diameter of 215.9 mm or more but not exceeding 406.4 mm	kg
Calculate duties for this HTS code
7304.24.60.75	Having an outside diameter exceeding 406.4 mm	kg
Calculate duties for this HTS code
7304.29	Other
	Casing
	Of iron or nonalloy steel
7304.29.10	Threaded or coupled		Free
	Having an outside diameter less than 215.9 mm
7304.29.10.10	Having a wall thickness less than 12.7 mm	kg
Calculate duties for this HTS code
7304.29.10.20	Having a wall thickness of 12.7 mm or more	kg
Calculate duties for this HTS code
	Having an outside diameter of 215.9 mm or more but not exceeding 285.8 mm
7304.29.10.30	Having a wall thickness less than 12.7 mm	kg
Calculate duties for this HTS code
7304.29.10.40	Having a wall thickness of 12.7 mm or more	kg
Calculate duties for this HTS code
	Having an outside diameter exceeding 285.8 mm but not exceeding 406.4 mm
7304.29.10.50	Having a wall thickness less than 12.7 mm	kg
Calculate duties for this HTS code
7304.29.10.60	Having a wall thickness of 12.7 mm or more	kg
Calculate duties for this HTS code
7304.29.10.80	Having an outside diameter exceeding 406.4 mm	kg
Calculate duties for this HTS code
7304.29.20	Other		Free
	Having an outside diameter less than 215.9 mm
7304.29.20.10	Having a wall thickness less than 12.7 mm	kg
Calculate duties for this HTS code
7304.29.20.20	Having a wall thickness of 12.7 mm or more	kg
Calculate duties for this HTS code
	Having an outside diameter of 215.9 mm or more but not exceeding 285.8 mm
7304.29.20.30	Having a wall thickness less than 12.7 mm	kg
Calculate duties for this HTS code
7304.29.20.40	Having a wall thickness of 12.7 mm or more	kg
Calculate duties for this HTS code
	Having an outside diameter exceeding 285.8 mm but not exceeding 406.4 mm
7304.29.20.50	Having a wall thickness less than 12.7 mm	kg
Calculate duties for this HTS code
7304.29.20.60	Having a wall thickness of 12.7 mm or more	kg
Calculate duties for this HTS code
7304.29.20.80	Having an outside diameter exceeding 406.4 mm	kg
Calculate duties for this HTS code
	Of other alloy steel
7304.29.31	Threaded or coupled		Free
	Having an outside diameter less than 215.9 mm
7304.29.31.10	Having a wall thickness less than 12.7 mm	kg
Calculate duties for this HTS code
7304.29.31.20	Having a wall thickness of 12.7 mm or more	kg
Calculate duties for this HTS code
	Having an outside diameter of 215.9 mm or more but not exceeding 285.8 mm
7304.29.31.30	Having a wall thickness less than 12.7 mm	kg
Calculate duties for this HTS code
7304.29.31.40	Having a wall thickness of 12.7 mm or more	kg
Calculate duties for this HTS code
	Having an outside diameter exceeding 285.8 mm but not exceeding 406.4 mm
7304.29.31.50	Having a wall thickness less than 12.7 mm	kg
Calculate duties for this HTS code
7304.29.31.60	Having a wall thickness of 12.7 mm or more	kg
Calculate duties for this HTS code
7304.29.31.80	Having an outside diameter exceeding 406.4 mm	kg
Calculate duties for this HTS code
7304.29.41	Other		Free
	Having an outside diameter less than 215.9 mm
7304.29.41.10	Having a wall thickness less than 12.7 mm	kg
Calculate duties for this HTS code
7304.29.41.20	Having a wall thickness of 12.7 mm or more	kg
Calculate duties for this HTS code
	Having an outside diameter of 215.9 mm or more but not exceeding 285.8 mm
7304.29.41.30	Having a wall thickness less than 12.7 mm	kg
Calculate duties for this HTS code
7304.29.41.40	Having a wall thickness of 12.7 mm or more	kg
Calculate duties for this HTS code
	Having an outside diameter exceeding 285.8 mm but not exceeding 406.4 mm
7304.29.41.50	Having a wall thickness less than 12.7 mm	kg
Calculate duties for this HTS code
7304.29.41.60	Having a wall thickness of 12.7 mm or more	kg
Calculate duties for this HTS code
7304.29.41.80	Having an outside diameter exceeding 406.4 mm	kg
Calculate duties for this HTS code
	Tubing
7304.29.50	Of iron or nonalloy steel		Free
	Having an outside diameter not exceeding 114.3 mm
7304.29.50.15	Having a wall thickness not exceeding 9.5 mm	kg
Calculate duties for this HTS code
7304.29.50.30	Having a wall thickness exceeding 9.5 mm	kg
Calculate duties for this HTS code
7304.29.50.45	Having an outside diameter exceeding 114.3 mm but less than 215.9 mm	kg
Calculate duties for this HTS code
7304.29.50.60	Having an outside diameter of 215.9 mm or more but not exceeding 406.4 mm	kg
Calculate duties for this HTS code
7304.29.50.75	Having an outside diameter exceeding 406.4 mm	kg
Calculate duties for this HTS code
7304.29.61	Of other alloy steel		Free
	Having an outside diameter not exceeding 114.3 mm
7304.29.61.15	Having a wall thickness not exceeding 9.5 mm	kg
Calculate duties for this HTS code
7304.29.61.30	Having a wall thickness exceeding 9.5 mm	kg
Calculate duties for this HTS code
7304.29.61.45	Having an outside diameter exceeding 114.3 mm but less than 215.9 mm	kg
Calculate duties for this HTS code
7304.29.61.60	Having an outside diameter of 215.9 mm or more but not exceeding 406.4 mm	kg
Calculate duties for this HTS code
7304.29.61.75	Having an outside diameter exceeding 406.4 mm	kg
Calculate duties for this HTS code
	Other, of circular cross section, of iron or nonalloy steel
7304.31	Cold-drawn or cold-rolled (cold-reduced)
7304.31.30.00	Hollow bars	kg	Free
Calculate duties for this HTS code
7304.31.60	Other		Free
7304.31.60.10	Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters	kg
Calculate duties for this HTS code
7304.31.60.50	Other	kg
Calculate duties for this HTS code
7304.39.00	Other		Free
	Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters
7304.39.00.02	Having an outside diameter less than 38.1 mm	kg
Calculate duties for this HTS code
7304.39.00.04	Having an outside diameter of 38.1 mm or more but less than 190.5 mm	kg
Calculate duties for this HTS code
7304.39.00.06	Having an outside diameter of 190.5 mm or more but not exceeding 285.8 mm	kg
Calculate duties for this HTS code
7304.39.00.08	Having an outside diameter exceeding 285.8 mm	kg
Calculate duties for this HTS code
	Other
7304.39.00.16	Galvanized, having an outside diameter not exceeding 114.3 mm	kg
Calculate duties for this HTS code
	Other
7304.39.00.20	Having an outside diameter less than 38.1 mm	kg
Calculate duties for this HTS code
	Having an outside diameter of 38.1 mm or more but not exceeding 114.3 mm
7304.39.00.24	Having a wall thickness less than 6.4 mm	kg
Calculate duties for this HTS code
7304.39.00.28	Having a wall thickness of 6.4 mm or more but not exceeding 12.7 mm	kg
Calculate duties for this HTS code
7304.39.00.32	Having a wall thickness exceeding 12.7 mm	kg
Calculate duties for this HTS code
	Having an outside diameter exceeding 114.3 mm but less than 190.5 mm:
7304.39.00.36	Having a wall thickness less than 12.7 mm	kg
Calculate duties for this HTS code
7304.39.00.40	Having a wall thickness of 12.7 mm or more but less than 19 mm	kg
Calculate duties for this HTS code
7304.39.00.44	Having a wall thickness of 19 mm or more	kg
Calculate duties for this HTS code
	Having an outside diameter of 190.5 mm or more but not exceeding 285.8 mm
7304.39.00.48	Having a wall thickness less than 12.7 mm	kg
Calculate duties for this HTS code
7304.39.00.52	Having a wall thickness of 12.7 mm or more but less than 19 mm	kg
Calculate duties for this HTS code
7304.39.00.56	Having a wall thickness of 19 mm or more	kg
Calculate duties for this HTS code
	Having an outside diameter exceeding 285.8 mm but not exceeding 406.4 mm
7304.39.00.62	Having a wall thickness less than 12.7 mm	kg
Calculate duties for this HTS code
7304.39.00.68	Having a wall thickness of 12.7 mm or more but less than 19 mm	kg
Calculate duties for this HTS code
7304.39.00.72	Having a wall thickness of 19 mm or more	kg
Calculate duties for this HTS code
	Having an outside diameter exceeding 406.4 mm
7304.39.00.76	Having a wall thickness less than 19 mm	kg
Calculate duties for this HTS code
7304.39.00.80	Having a wall thickness of 19 mm or more	kg
Calculate duties for this HTS code
	Other, of circular cross section, of stainless steel
7304.41	Cold-drawn or cold-rolled (cold-reduced)
7304.41.30	Of an external diameter of less than 19 mm		Free
7304.41.30.05	Of high-nickel alloy steel	kg
Calculate duties for this HTS code
	Other
7304.41.30.15	Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters	kg
Calculate duties for this HTS code
7304.41.30.45	Other	kg
Calculate duties for this HTS code
7304.41.60	Other		Free
7304.41.60.05	Of high-nickel alloy steel	kg
Calculate duties for this HTS code
	Other
7304.41.60.15	Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters	kg
Calculate duties for this HTS code
7304.41.60.45	Other	kg
Calculate duties for this HTS code
7304.49.00	Other		Free
7304.49.00.05	Of high-nickel alloy steel	kg
Calculate duties for this HTS code
	Other
7304.49.00.15	Hollow bars	kg
Calculate duties for this HTS code
	Other
7304.49.00.45	Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters	kg
Calculate duties for this HTS code
7304.49.00.60	Other	kg
Calculate duties for this HTS code
	Other, of circular cross section, of other alloy steel
7304.51	Cold-drawn or cold-rolled (cold-reduced)
7304.51.10.00	Suitable for use in the manufacture of ball or roller bearings	kg	Free
Calculate duties for this HTS code
7304.51.50	Other		Free
7304.51.50.05	Of high-nickel alloy steel	kg
Calculate duties for this HTS code
	Other
	Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters
7304.51.50.15	Of heat-resisting steel	kg
Calculate duties for this HTS code
7304.51.50.45	Other	kg
Calculate duties for this HTS code
7304.51.50.60	Other	kg
Calculate duties for this HTS code
7304.59	Other
7304.59.10.00	Suitable for use in the manufacture of ball or roller bearings	kg	Free
Calculate duties for this HTS code
	Other
7304.59.20	Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters		Free
7304.59.20.30	Of heat-resisting steel	kg
Calculate duties for this HTS code
	Other
7304.59.20.40	Having an outside diameter less than 38.1 mm	kg
Calculate duties for this HTS code
7304.59.20.45	Having an outside diameter of 38.1 mm or more but not exceeding 114.3 mm	kg
Calculate duties for this HTS code
7304.59.20.55	Having an outside diameter exceeding 114.3 mm but less than 190.5 mm	kg
Calculate duties for this HTS code
7304.59.20.60	Having an outside diameter of 190.5 mm or more but not exceeding 285.8 mm	kg
Calculate duties for this HTS code
7304.59.20.70	Having an outside diameter exceeding 285.8 mm but not exceeding 406.4 mm	kg
Calculate duties for this HTS code
7304.59.20.80	Having an outside diameter exceeding 406.4 mm	kg
Calculate duties for this HTS code
	Other
7304.59.60.00	Of heat-resisting steel	kg	Free
Calculate duties for this HTS code
7304.59.80	Other		Free
7304.59.80.10	Having an outside diameter less than 38.1 mm	kg
Calculate duties for this HTS code
	Having an outside diameter of 38.1 mm or more but not exceeding 114.3 mm
7304.59.80.15	Having a wall thickness less than 6.4 mm	kg
Calculate duties for this HTS code
7304.59.80.20	Having a wall thickness of 6.4 mm or more but not exceeding 12.7 mm	kg
Calculate duties for this HTS code
7304.59.80.25	Having a wall thickness exceeding 12.7 mm	kg
Calculate duties for this HTS code
	Having an outside diameter exceeding 114.3 mm but less than 190.5 mm:
7304.59.80.30	Having a wall thickness less than 12.7 mm	kg
Calculate duties for this HTS code
7304.59.80.35	Having a wall thickness of 12.7 mm or more but less than 19 mm	kg
Calculate duties for this HTS code
7304.59.80.40	Having a wall thickness of 19 mm or more	kg
Calculate duties for this HTS code
	Having an outside diameter of 190.5 mm or more but not exceeding 285.8 mm
7304.59.80.45	Having a wall thickness less than 12.7 mm	kg
Calculate duties for this HTS code
7304.59.80.50	Having a wall thickness of 12.7 mm or more but less than 19 mm	kg
Calculate duties for this HTS code
7304.59.80.55	Having a wall thickness of 19 mm or more	kg
Calculate duties for this HTS code
	Having an outside diameter exceeding 285.8 mm but not exceeding 406.4 mm
7304.59.80.60	Having a wall thickness less than 12.7 mm	kg
Calculate duties for this HTS code
7304.59.80.65	Having a wall thickness of 12.7 mm or more but less than 19 mm	kg
Calculate duties for this HTS code
7304.59.80.70	Having a wall thickness of 19 mm or more	kg
Calculate duties for this HTS code
7304.59.80.80	Having an outside diameter exceeding 406.4 mm	kg
Calculate duties for this HTS code
7304.90	Other
	Having a wall thickness of 4 mm or more
7304.90.10.00	Of iron or nonalloy steel	kg	Free
Calculate duties for this HTS code
7304.90.30.00	Of alloy steel	kg	Free
Calculate duties for this HTS code
	Having a wall thickness of less than 4 mm:
7304.90.50.00	Of iron or nonalloy steel	kg	Free
Calculate duties for this HTS code
7304.90.70.00	Of alloy steel	kg	Free
Calculate duties for this HTS code
7305	Other tubes and pipes (for example, welded, riveted or similarly closed), having circular cross sections, the external diameter of which exceeds 406.4 mm, of iron or steel
	Line pipe of a kind used for oil or gas pipelines
7305.11	Longitudinally submerged arc welded
7305.11.10	Of iron or nonalloy steel		Free
7305.11.10.30	With an external diameter exceeding 406.4 mm but not exceeding 609.6 mm	kg
Calculate duties for this HTS code
7305.11.10.60	With an external diameter exceeding 609.6 mm	kg
Calculate duties for this HTS code
7305.11.50.00	Of alloy steel	kg	Free
Calculate duties for this HTS code
7305.12	Other, longitudinally welded
7305.12.10	Of iron or nonalloy steel		Free
7305.12.10.30	With an external diameter exceeding 406.4 mm but not exceeding 609.6 mm	kg
Calculate duties for this HTS code
7305.12.10.60	With an external diameter exceeding 609.6 mm	kg
Calculate duties for this HTS code
7305.12.50.00	Of alloy steel	kg	Free
Calculate duties for this HTS code
7305.19	Other
7305.19.10	Of iron or nonalloy steel		Free
7305.19.10.30	With an external diameter exceeding 406.4 mm but not exceeding 609.6 mm	kg
Calculate duties for this HTS code
7305.19.10.60	With an external diameter exceeding 609.6 mm	kg
Calculate duties for this HTS code
7305.19.50.00	Of alloy steel	kg	Free
Calculate duties for this HTS code
7305.20	Casing of a kind used in drilling for oil or gas
	Of iron or nonalloy steel
7305.20.20.00	Threaded or coupled	kg	Free
Calculate duties for this HTS code
7305.20.40.00	Other	kg	Free
Calculate duties for this HTS code
	Of alloy steel
7305.20.60.00	Threaded or coupled	kg	Free
Calculate duties for this HTS code
7305.20.80.00	Other	kg	Free
Calculate duties for this HTS code
	Other, welded
7305.31	Longitudinally welded
7305.31.20.00	Tapered pipes and tubes of steel principally used as parts of illuminating articles	kg	Free
Calculate duties for this HTS code
	Other
7305.31.40.00	Of iron or nonalloy steel	kg	Free
Calculate duties for this HTS code
7305.31.60	Of alloy steel		Free
7305.31.60.10	Of stainless steel	kg
Calculate duties for this HTS code
7305.31.60.90	Other	kg
Calculate duties for this HTS code
7305.39	Other
7305.39.10.00	Of iron or nonalloy steel	kg	Free
Calculate duties for this HTS code
7305.39.50.00	Of alloy steel	kg	Free
Calculate duties for this HTS code
7305.90	Other
7305.90.10.00	Of iron or nonalloy steel	kg	Free
Calculate duties for this HTS code
7305.90.50.00	Of alloy steel	kg	Free
Calculate duties for this HTS code
7306	Other tubes, pipes and hollow profiles (for example, open seamed or welded, riveted or similarly closed), of iron or steel
	Line pipe of a kind used for oil or gas pipelines
7306.11.00	Welded, of stainless steel		Free
7306.11.00.10	With an outside diameter not exceeding 114.3 mm	kg
Calculate duties for this HTS code
7306.11.00.50	With an outside diameter exceeding 114.3 mm	kg
Calculate duties for this HTS code
7306.19	Other
7306.19.10	Of iron or nonalloy steel		Free
7306.19.10.10	With an outside diameter not exceeding 114.3 mm	kg
Calculate duties for this HTS code
7306.19.10.50	With an outside diameter exceeding 114.3 mm	kg
Calculate duties for this HTS code
7306.19.51	Of alloy steel		Free
7306.19.51.10	With an outside diameter not exceeding 114.3 mm	kg
Calculate duties for this HTS code
7306.19.51.50	With an outside diameter exceeding 114.3 mm	kg
Calculate duties for this HTS code
	Casing and tubing of a kind used in drilling for oil or gas
7306.21	Welded of stainless steel
	Casing
7306.21.30.00	Threaded or coupled	kg	Free
Calculate duties for this HTS code
7306.21.40.00	Other	kg	Free
Calculate duties for this HTS code
7306.21.80	Tubing		Free
7306.21.80.10	Imported with coupling	kg
Calculate duties for this HTS code
7306.21.80.50	Other	kg
Calculate duties for this HTS code
7306.29	Other
	Casing
	Of iron or nonalloy steel
7306.29.10	Threaded or coupled		Free
7306.29.10.30	Imported with coupling	kg
Calculate duties for this HTS code
7306.29.10.90	Other	kg
Calculate duties for this HTS code
7306.29.20.00	Other	kg	Free
Calculate duties for this HTS code
	Other
7306.29.31.00	Threaded or coupled	kg	Free
Calculate duties for this HTS code
7306.29.41.00	Other	kg	Free
Calculate duties for this HTS code
	Tubing
7306.29.60	Of iron or nonalloy steel		Free
7306.29.60.10	Imported with coupling	kg
Calculate duties for this HTS code
7306.29.60.50	Other	kg
Calculate duties for this HTS code
7306.29.81	Other		Free
7306.29.81.10	Imported with coupling	kg
Calculate duties for this HTS code
7306.29.81.50	Other	kg
Calculate duties for this HTS code
7306.30	Other, welded, of circular cross section, of iron or nonalloy steel
7306.30.10	Having a wall thickness of less than 1.65 mm		Free
7306.30.10.10	Internally coated or lined with a non-electrically insulating material, suitable for use as electrical conduit	kg
Calculate duties for this HTS code
7306.30.10.90	Other	kg
Calculate duties for this HTS code
	Having a wall thickness of 1.65 mm or more
7306.30.30.00	Tapered steel pipes and tubes principally used as parts of illuminating articles	kg	Free
Calculate duties for this HTS code
7306.30.50	Other		Free
7306.30.50.10	Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters, whether or not cold drawn	kg
Calculate duties for this HTS code
7306.30.50.15	Other, cold-drawn	kg
Calculate duties for this HTS code
7306.30.50.20	Other, cold-rolled (cold-reduced) with a wall thickness not exceeding 2.54 mm	kg
Calculate duties for this HTS code
	Other
	With an outside diameter not exceeding 114.3 mm
	Galvanized
	Imported with coupling
7306.30.50.26	With an outside diameter not exceeding 50.8 mm	kg
Calculate duties for this HTS code
7306.30.50.27	With an outside diameter exceeding 50.8 mm but not exceeding 114.3 mm	kg
Calculate duties for this HTS code
7306.30.50.28	Internally coated or lined with a non-electrically insulating material, suitable for use as electrical conduit	kg
Calculate duties for this HTS code
	Other
7306.30.50.31	With an outside diameter not exceeding 50.8 mm	kg
Calculate duties for this HTS code
7306.30.50.33	With an outside diameter exceeding 50.8 mm but not exceeding 114.3 mm	kg
Calculate duties for this HTS code
	Other
7306.30.50.35	Tube and pipe hollows for redrawing	kg
Calculate duties for this HTS code
	Imported with coupling
7306.30.50.41	With an outside diameter not exceeding 50.8 mm	kg
Calculate duties for this HTS code
7306.30.50.43	With an outside diameter exceeding 50.8 mm but not exceeding 114.3 mm	kg
Calculate duties for this HTS code
	Other
7306.30.50.56	With an outside diameter not exceeding 50.8 mm	kg
Calculate duties for this HTS code
7306.30.50.57	With an outside diameter exceeding 50.8 mm but not exceeding 114.3 mm	kg
Calculate duties for this HTS code
	With an outside diameter exceeding 114.3 mm but not exceeding 406.4 mm
7306.30.50.85	Galvanized	kg
Calculate duties for this HTS code
7306.30.50.90	Other	kg
Calculate duties for this HTS code
7306.40	Other, welded, of circular cross section, of stainless steel
7306.40.10	Having a wall thickness of less than 1.65 mm		Free
	Containing more than 0.5 percent by weight of nickel
7306.40.10.10	Containing more than 1.5 percent but less than 5 percent by weight of molybdenum	kg
Calculate duties for this HTS code
7306.40.10.15	Other	kg
Calculate duties for this HTS code
7306.40.10.90	Other	kg
Calculate duties for this HTS code
7306.40.50	Having a wall thickness of 1.65 mm or more		Free
7306.40.50.05	Of high-nickel alloy steel	kg
Calculate duties for this HTS code
	Other
7306.40.50.15	Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters, whether or not cold-drawn	kg
Calculate duties for this HTS code
	Other, cold-drawn or cold-rolled (cold- reduced)
7306.40.50.40	Containing more than 0.5 percent but less than 24 percent by weight of nickel	kg
Calculate duties for this HTS code
	Other
7306.40.50.42	Containing less than 15 percent by weight of chromium	kg
Calculate duties for this HTS code
7306.40.50.44	Other	kg
Calculate duties for this HTS code
	Other
	With an outside diameter not exceeding 114.3 mm
	Containing more than 0.5 percent but less than 24 percent by weight of nickel
7306.40.50.62	Containing more than 1.5 percent but less than 5 percent by weight of molybdenum	kg
Calculate duties for this HTS code
7306.40.50.64	Other	kg
Calculate duties for this HTS code
7306.40.50.80	Other	kg
Calculate duties for this HTS code
	With an outside diameter exceeding 114.3 mm but not exceeding 406.4 mm
7306.40.50.85	Containing more than 0.5 percent but less than 24 percent by weight of nickel	kg
Calculate duties for this HTS code
7306.40.50.90	Other	kg
Calculate duties for this HTS code
7306.50	Other, welded, of circular cross section, of other alloy steel
7306.50.10.00	Having a wall thickness of less than 1.65 mm	kg	Free
Calculate duties for this HTS code
	Having a wall thickness of 1.65 mm or more
7306.50.30.00	Tapered pipes and tubes of steel principally used as parts of illuminating articles	kg	Free
Calculate duties for this HTS code
7306.50.50	Other		Free
7306.50.50.10	Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters, whether or not cold-drawn	kg
Calculate duties for this HTS code
7306.50.50.30	Other, cold-drawn or cold-rolled (cold- reduced)	kg
Calculate duties for this HTS code
	Other
7306.50.50.50	With an outside diameter not exceeding 114.3 mm	kg
Calculate duties for this HTS code
7306.50.50.70	With an outside diameter exceeding 114.3 mm but not exceeding 406.4 mm	kg
Calculate duties for this HTS code
	Other, welded, of noncircular cross section
7306.61	Of square or rectangular cross section
	Having a wall thickness of 4 mm or more
7306.61.10.00	Of iron or nonalloy steel	kg	Free
Calculate duties for this HTS code
7306.61.30.00	Of alloy steel	kg	Free
Calculate duties for this HTS code
	Having a wall thickness of less than 4 mm:
7306.61.50.00	Of iron or nonalloy steel	kg	Free
Calculate duties for this HTS code
7306.61.70	Of alloy steel		Free
7306.61.70.30	Of stainless steel	kg
Calculate duties for this HTS code
7306.61.70.60	Other	kg
Calculate duties for this HTS code
7306.69	Of other noncircular cross section
	Having a wall thickness of 4 mm or more
7306.69.10.00	Of iron or nonalloy steel	kg	Free
Calculate duties for this HTS code
7306.69.30.00	Of alloy steel	kg	Free
Calculate duties for this HTS code
	Having a wall thickness of less than 4 mm:
7306.69.50.00	Of iron or nonalloy steel	kg	Free
Calculate duties for this HTS code
7306.69.70	Of alloy steel		Free
7306.69.70.30	Of stainless steel	kg
Calculate duties for this HTS code
7306.69.70.60	Other	kg
Calculate duties for this HTS code
7306.90	Other
7306.90.10.00	Of iron or nonalloy steel	kg	Free
Calculate duties for this HTS code
7306.90.50.00	Of alloy steel	kg	Free
Calculate duties for this HTS code
7307	Tube or pipe fittings (for example, couplings, elbows, sleeves), of iron or steel
	Cast fittings
7307.11.00	Of nonmalleable cast iron		4.8%	Free (*,S,)
7307.11.00.30	For threaded pipe	kg
Calculate duties for this HTS code
	Other
7307.11.00.45	For cast-iron soil pipe	kg
Calculate duties for this HTS code
7307.11.00.60	Other	kg
Calculate duties for this HTS code
7307.19	Other
7307.19.30	Ductile fittings		5.6%	Free (*,S,)
7307.19.30.40	Grooved-end fittings (including grooved couplings)	kg
Calculate duties for this HTS code
	Other
7307.19.30.60	Threaded	kg
Calculate duties for this HTS code
7307.19.30.70	With mechanical, push-on (rubber compression) or flanged joints attached	kg
Calculate duties for this HTS code
7307.19.30.85	Other	kg
Calculate duties for this HTS code
7307.19.90	Other		6.2%	Free (, S,)
7307.19.90.30	Unions	kg
Calculate duties for this HTS code
	Other
7307.19.90.40	Grooved-end fittings (including grooved couplings)	kg
Calculate duties for this HTS code
	Other
7307.19.90.60	Threaded	kg
Calculate duties for this HTS code
7307.19.90.80	Other	kg
Calculate duties for this HTS code
	Other, of stainless steel
7307.21	Flanges
7307.21.10.00	Not machined, not tooled and not otherwise processed after forging	kg	3.3%	Free (*,S,)
Calculate duties for this HTS code
7307.21.50.00	Other	kg	5.6%	Free (*,S,)
Calculate duties for this HTS code
7307.22	Threaded elbows, bends and sleeves
7307.22.10.00	Sleeves (couplings)	kg	Free
Calculate duties for this HTS code
7307.22.50.00	Other	kg	6.2%	Free (,S,)
Calculate duties for this HTS code
7307.23.00	Butt welding fittings		5%	Free (*,S,)
7307.23.00.30	Not machined, not tooled and not otherwise processed after forming	kg
Calculate duties for this HTS code
7307.23.00.90	Other	kg
Calculate duties for this HTS code
7307.29.00	Other		5%	Free (*,S,)
7307.29.00.30	Nipples	kg
Calculate duties for this HTS code
7307.29.00.90	Other	kg
Calculate duties for this HTS code
	Other
7307.91	Flanges
	Not machined, not tooled and not otherwise processed after forging
7307.91.10.00	Of iron or nonalloy steel	kg	3.3%	Free (,JS,)
Calculate duties for this HTS code
7307.91.30.00	Of alloy steel (except stainless steel)	kg	3.2%	Free (*,JS,)
Calculate duties for this HTS code
7307.91.50	Other		5.5%	Free (*,S,) 2.75% ()
	With an inside diameter of less than 360 mm:
7307.91.50.10	Of iron or nonalloy steel	kg
Calculate duties for this HTS code
7307.91.50.30	Of alloy steel (except stainless steel)	kg
Calculate duties for this HTS code
	With an inside diameter of 360 mm or more
7307.91.50.50	Of iron or nonalloy steel	kg
Calculate duties for this HTS code
7307.91.50.70	Of alloy steel (except stainless steel)	kg
Calculate duties for this HTS code
7307.92	Threaded elbows, bends and sleeves
7307.92.30	Sleeves (couplings)		Free
7307.92.30.10	Of iron or nonalloy steel	kg
Calculate duties for this HTS code
7307.92.30.30	Of alloy steel (except stainless steel)	kg
Calculate duties for this HTS code
7307.92.90.00	Other	kg	6.2%	Free (,S,) 3.1% ()
Calculate duties for this HTS code
7307.93	Butt welding fittings
	With an inside diameter of less than 360 mm
7307.93.30	Of iron or nonalloy steel		6.2%	Free (,S,)
7307.93.30.10	Not machined, not tooled and not otherwise processed after forging	kg
Calculate duties for this HTS code
7307.93.30.40	Other	kg
Calculate duties for this HTS code
7307.93.60.00	Of alloy steel (except stainless steel)	kg	5.5%	Free (*,S,)
Calculate duties for this HTS code
7307.93.90	With an inside diameter of 360 mm or more		4.3%	Free (*,S,)
	Of iron or nonalloy steel
7307.93.90.10	Not machined, not tooled and not otherwise processed after forging	kg
Calculate duties for this HTS code
7307.93.90.40	Other	kg
Calculate duties for this HTS code
7307.93.90.60	Of alloy steel (except stainless steel)	kg
Calculate duties for this HTS code
7307.99	Other
	Not machined, not tooled and not otherwise processed after forging
7307.99.10.00	Of iron or nonalloy steel	kg	3.7%	Free (,JS,)
Calculate duties for this HTS code
7307.99.30.00	Of alloy steel (except stainless steel)	kg	3.2%	Free (,JS,)
Calculate duties for this HTS code
7307.99.50	Other		4.3%	Free (,JS,)
	Of iron or nonalloy steel
7307.99.50.15	Nipples	kg
Calculate duties for this HTS code
7307.99.50.45	Other	kg
Calculate duties for this HTS code
7307.99.50.60	Of alloy steel (except stainless steel)	kg
Calculate duties for this HTS code
7308	Structures (excluding prefabricated buildings of heading 9406) and parts of structures (for example, bridges and bridge sections, lock gates, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, shutters, balustrades, pillars and columns) of iron or steel; plates, rods, angles, shapes, sections, tubes and the like, prepared for use in structures, of iron or steel
7308.10.00.00	Bridges and bridge sections	kg	Free
Calculate duties for this HTS code
7308.20.00	Towers and lattice masts		Free
7308.20.00.30	Tubular, whether or not tapered, and sectional components thereof	kg
Calculate duties for this HTS code
7308.20.00.35	Tubular wind turbine towers, whether or not tapered, and sectional components thereof	kg
Calculate duties for this HTS code
7308.20.00.90	Other	kg
Calculate duties for this HTS code
7308.30	Doors, windows and their frames and thresholds for doors
7308.30.10.00	Of stainless steel	kg	Free
Calculate duties for this HTS code
7308.30.50	Other		Free
7308.30.50.15	Windows and their frames	kg
Calculate duties for this HTS code
7308.30.50.25	Thresholds for doors	kg
Calculate duties for this HTS code
7308.30.50.50	Other	kg
Calculate duties for this HTS code
7308.40.00.00	Equipment for scaffolding, shuttering, propping or pit- propping	kg	Free
Calculate duties for this HTS code
7308.90	Other
	Columns, pillars, posts, beams, girders and similar structural units
7308.90.30.00	Not in part of alloy steel	kg	Free
Calculate duties for this HTS code
7308.90.60.00	Other	kg	Free
Calculate duties for this HTS code
	Other
7308.90.70.00	Steel grating	kg	Free
Calculate duties for this HTS code
7308.90.95	Other		Free
7308.90.95.30	Sheet-metal roofing, siding, flooring and roof drainage equipment	kg
Calculate duties for this HTS code
	Other
7308.90.95.60	Architectural and ornamental work	kg
Calculate duties for this HTS code
7308.90.95.90	Other	kg
Calculate duties for this HTS code
7309.00.00	Reservoirs, tanks, vats and similar containers for any material (other than compressed or liquefied gas), of iron or steel, of a capacity exceeding 300 liters, whether or not lined or heat insulated, but not fitted with mechanical or thermal equipment		Free
7309.00.00.30	Tanks	No., kg
Calculate duties for this HTS code
7309.00.00.90	Other	No., kg
Calculate duties for this HTS code
7310	Tanks, casks, drums, cans, boxes and similar containers, for any material (other than compressed or liquefied gas), of iron or steel, of a capacity not exceeding 300 liters, whether or not lined or heat insulated, but not fitted with mechanical or thermal equipment
7310.10.00	Of a capacity of 50 liters or more		Free
7310.10.00.05	Refillable stainless steel kegs, whether or not pressurized, of a kind described in statistical note 1 to this chapter.	No.
Calculate duties for this HTS code
7310.10.00.15	Empty steel drums and barrels	No., kg
Calculate duties for this HTS code
7310.10.00.90	Other	kg
Calculate duties for this HTS code
	Of a capacity of less than 50 liters:
7310.21.00	Cans which are to be closed by soldering or crimping		Free
7310.21.00.25	Containers, of circular cross section, of a volume capacity between 11.4 liters and 26.6 liters, of a kind used for the conveyance of goods	No.
Calculate duties for this HTS code
7310.21.00.70	Containers of a circular cross section, of a capacity not exceeding 11.4 liters, of a kind used for aerosols	No.
Calculate duties for this HTS code
7310.21.00.75	Other	No.
Calculate duties for this HTS code
7310.29.00	Other		Free
	Containers, of circular cross section, of a volume capacity between 11.4 liters and 26.6 liters, of a kind used for the conveyance of goods
7310.29.00.20	Refillable stainless steel kegs, whether or not pressurized, of a kind described in statistical note 1 to this chapter	No.
Calculate duties for this HTS code
7310.29.00.30	Other	No.
Calculate duties for this HTS code
	Other
7310.29.00.55	Refillable stainless steel kegs, whether or not pressurized, of a kind described in statistical note 1 to this chapter	No.
Calculate duties for this HTS code
7310.29.00.65	Other	No.
Calculate duties for this HTS code
7311.00.00	Containers for compressed or liquefied gas, of iron or steel		Free
	Certified prior to exportation to have been made in accordance with the safety requirements of sections 178.36 through 178.68 of title 49 CFR or under a specific exemption to those requirements
7311.00.00.30	Seamless steel containers not overwrapped, marked DOT 3A, 3AX, 3AA, 3AAX, 3B, 3E, 3HT, 3T or DOT-E followed by a specific exemption number	No., kg
Calculate duties for this HTS code
7311.00.00.60	Other	No., kg
Calculate duties for this HTS code
7311.00.00.90	Other	No., kg
Calculate duties for this HTS code
7312	Stranded wire, ropes, cables, plaited bands, slings and the like, of iron or steel, not electrically insulated
7312.10	Stranded wire, ropes and cables
	Stranded wire
	Of stainless steel
7312.10.05.00	Fitted with fittings or made up into articles	kg	Free
Calculate duties for this HTS code
7312.10.10	Other		Free
7312.10.10.30	Tire cord	kg
Calculate duties for this HTS code
7312.10.10.50	Other, stranded wire having a lay or twist of not more than 1 revolution for a length equal to the strand diameter multiplied by 8.5	kg
Calculate duties for this HTS code
7312.10.10.70	Other	kg
Calculate duties for this HTS code
	Other
7312.10.20.00	Fitted with fittings or made up into articles	kg	Free
Calculate duties for this HTS code
7312.10.30	Other		Free
7312.10.30.05	Tire cord	kg
Calculate duties for this HTS code
	For prestressing concrete
7312.10.30.10	Covered with textile or other non- metallic material	kg
Calculate duties for this HTS code
7312.10.30.12	Other	kg
Calculate duties for this HTS code
7312.10.30.20	Other, stranded wire having a lay or twist of not more than 1 revolution for a length equal to the strand diameter multiplied by 8.5	kg
Calculate duties for this HTS code
	Other
7312.10.30.45	Of brass plated wire	kg
Calculate duties for this HTS code
	Other
	Galvanized
7312.10.30.65	ACSR core strand	kg
Calculate duties for this HTS code
	Other
7312.10.30.70	Covered with textile or other nonmetallic material	kg
Calculate duties for this HTS code
7312.10.30.74	Other	kg
Calculate duties for this HTS code
7312.10.30.80	Other	kg
Calculate duties for this HTS code
	Ropes, cables and cordage other than stranded wire
	Of stainless steel
7312.10.50.00	Fitted with fittings or made up into articles	kg	Free
Calculate duties for this HTS code
7312.10.60	Other		Free
7312.10.60.30	With a diameter not exceeding 9.5 mm	kg
Calculate duties for this HTS code
7312.10.60.60	Other	kg
Calculate duties for this HTS code
	Other
7312.10.70.00	Fitted with fittings or made up into articles	kg	Free
Calculate duties for this HTS code
	Other
7312.10.80.00	Of brass plated wire	kg	Free
Calculate duties for this HTS code
7312.10.90	Other		Free
	Galvanized
7312.10.90.30	With a diameter not exceeding 9.5 mm	kg
Calculate duties for this HTS code
7312.10.90.60	With a diameter exceeding 9.5 mm	kg
Calculate duties for this HTS code
7312.10.90.90	Other	kg
Calculate duties for this HTS code
7312.90.00.00	Other	kg	Free
Calculate duties for this HTS code
7313.00.00.00	Barbed wire of iron or steel; twisted hoop or single flat wire, barbed or not, and loosely twisted double wire, of a kind used for fencing, of iron or steel	kg	Free
Calculate duties for this HTS code
7314	Cloth (including endless bands), grill, netting and fencing, of iron or steel wire; expanded metal of iron or steel
	Woven cloth
7314.12	Endless bands for machinery, of stainless steel
7314.12.10.00	With meshes not finer than 12 wires to the lineal centimeter in warp or filling	m<sup>2</sup>, kg	Free
Calculate duties for this HTS code
7314.12.20.00	With meshes finer than 12 but not finer than 36 wires to the lineal centimeter in warp or filling	m<sup>2</sup>, kg	Free
Calculate duties for this HTS code
	With meshes finer than 36 wires to the lineal centimeter in warp or filling
	Fourdrinier wires, seamed or not seamed, suitable for use in papermaking machines
7314.12.30.00	With 94 or more wires to the lineal centimeter	m<sup>2</sup>, kg	Free
Calculate duties for this HTS code
7314.12.60.00	Other	m<sup>2</sup>, kg	Free
Calculate duties for this HTS code
7314.12.90.00	Other	m<sup>2</sup>, kg	Free
Calculate duties for this HTS code
7314.14	Other woven cloth, of stainless steel
7314.14.10.00	With meshes not finer than 12 wires to the lineal centimeter in warp or filling	m<sup>2</sup>, kg	Free
Calculate duties for this HTS code
7314.14.20.00	With meshes finer than 12 but not finer than 36 wires to the lineal centimeter in warp or filling	m<sup>2</sup>, kg	Free
Calculate duties for this HTS code
	With meshes finer than 36 wires to the lineal centimeter in warp or maximum
	Fourdrinier wires, seamed or not seamed, suitable for use in papermaking machines
7314.14.30.00	With 94 or more wires to the lineal centimeter	m<sup>2</sup>, kg	Free
Calculate duties for this HTS code
7314.14.60.00	Other	m<sup>2</sup>, kg	Free
Calculate duties for this HTS code
7314.14.90.00	Other	m<sup>2</sup>, kg	Free
Calculate duties for this HTS code
7314.19.01.00	Other	m<sup>2</sup>, kg	Free
Calculate duties for this HTS code
7314.20.00.00	Grill, netting and fencing, welded at the intersection, of wire with a maximum cross-sectional dimension of 3 mm or more and having a mesh size of 100 cm² or more	kg	Free
Calculate duties for this HTS code
	Other grill, netting and fencing, welded at the intersection
7314.31	Plated or coated with zinc
7314.31.10.00	Wire fencing plated or coated with zinc, whether or not covered with plastic material	kg	Free
Calculate duties for this HTS code
7314.31.50	Other		Free
7314.31.50.10	Welded wire stucco netting, furred, not reinforced with supplemental horizontal wire	kg
Calculate duties for this HTS code
7314.31.50.80	Other	kg
Calculate duties for this HTS code
7314.39.00.00	Other	kg	Free
Calculate duties for this HTS code
	Other grill, netting and fencing
7314.41.00	Plated or coated with zinc		Free
7314.41.00.30	Chain link fencing	kg
Calculate duties for this HTS code
	Woven wire stucco netting, furred, not reinforced with supplemental horizontal wire
7314.41.00.40	Of wire with maximum cross- sectional dimension of 1 mm	kg
Calculate duties for this HTS code
7314.41.00.45	Other	kg
Calculate duties for this HTS code
7314.41.00.80	Other	kg
Calculate duties for this HTS code
7314.42.00	Coated with plastics		Free
7314.42.00.30	Chain link fencing	kg
Calculate duties for this HTS code
7314.42.00.60	Other	kg
Calculate duties for this HTS code
7314.49	Other
7314.49.30.00	Not cut to shape	kg	Free
Calculate duties for this HTS code
7314.49.60.00	Cut to shape	kg	Free
Calculate duties for this HTS code
7314.50.00.00	Expanded metal	m<sup>2</sup>, kg	Free
Calculate duties for this HTS code
7315	Chain and parts thereof, of iron or steel
	Articulated link chain and parts thereof
7315.11.00	Roller chain		Free
7315.11.00.05	For motor vehicles	kg
Calculate duties for this HTS code
	Other
	Of not over 50 mm pitch and containing more than 3 parts per pitch
7315.11.00.10	Bicycle chains	kg
Calculate duties for this HTS code
7315.11.00.45	Other	kg
Calculate duties for this HTS code
7315.11.00.60	Other	kg
Calculate duties for this HTS code
7315.12.00	Other chain		Free
7315.12.00.20	Of not over 50 mm pitch and containing more than 3 parts per pitch	kg
Calculate duties for this HTS code
	Other
7315.12.00.40	Welded steel chain	kg
Calculate duties for this HTS code
7315.12.00.60	Cast and combination chain	kg
Calculate duties for this HTS code
7315.12.00.80	Other	kg
Calculate duties for this HTS code
7315.19.00.00	Parts	kg	Free
Calculate duties for this HTS code
7315.20	Skid chain
7315.20.10.00	Not over 8 mm in diameter	kg	Free
Calculate duties for this HTS code
7315.20.50.00	Over 8 mm in diameter	kg	Free
Calculate duties for this HTS code
	Other chain
7315.81.00.00	Stud link	kg	Free
Calculate duties for this HTS code
7315.82	Other, welded link
	Of alloy steel
7315.82.10.00	Not over 10 mm in diameter	kg	Free
Calculate duties for this HTS code
7315.82.30.00	Over 10 mm in diameter	kg	Free
Calculate duties for this HTS code
	Of iron or nonalloy steel
7315.82.50.00	Not over 10 mm in diameter	kg	Free
Calculate duties for this HTS code
7315.82.70.00	Over 10 mm in diameter	kg	Free
Calculate duties for this HTS code
7315.89	Other
	With links of essentially round cross sections
7315.89.10.00	Not over 8 mm in diameter	kg	1.5%	Free (,S,)
Calculate duties for this HTS code
7315.89.30.00	Over 8 mm in diameter	kg	Free
Calculate duties for this HTS code
7315.89.50.00	Other	kg	3.9%	Free (,S,)
Calculate duties for this HTS code
7315.90.00.00	Other parts	kg	2.9%	Free (*,S,)
Calculate duties for this HTS code
7316.00.00.00	Anchors, grapnels and parts thereof, of iron or steel	No., kg	Free
Calculate duties for this HTS code
7317.00	Nails, tacks, drawing pins, corrugated nails, staples (other than those of heading 8305) and similar articles, of iron or steel, whether or not with heads of other material, but excluding such articles with heads of copper
7317.00.10.00	Thumb tacks	kg	Free
Calculate duties for this HTS code
	Other, suitable for use in powder-actuated handtools
7317.00.20.00	Not threaded	kg	Free
Calculate duties for this HTS code
7317.00.30.00	Threaded	kg	Free
Calculate duties for this HTS code
	Other
	Of one piece construction
7317.00.55	Made of round wire		Free
	Collated nails
7317.00.55.01	Collated roofing nails with a length of 20.6 mm to 46.1 mm, a head diameter of 8.3 mm to 10.6 mm, a shank diameter of 2.5 mm to 3.2 mm, whether or not galvanized	kg
Calculate duties for this HTS code
	Other
	Assembled in a wire coil
7317.00.55.02	Galvanized	kg
Calculate duties for this HTS code
7317.00.55.03	Other	kg
Calculate duties for this HTS code
	Assembled in a plastic strip
7317.00.55.05	Galvanized	kg
Calculate duties for this HTS code
7317.00.55.07	Other	kg
Calculate duties for this HTS code
7317.00.55.08	Assembled in a paper strip	kg
Calculate duties for this HTS code
7317.00.55.11	Assembled in a wire strip	kg
Calculate duties for this HTS code
7317.00.55.18	Other	kg
Calculate duties for this HTS code
	Other
7317.00.55.19	With a length of less than 25.4 mm and with a diameter of less than 1.65 mm	kg
Calculate duties for this HTS code
	Other
	Smooth shank
7317.00.55.20	Not coated, plated or painted	kg
Calculate duties for this HTS code
	Coated, plated or painted
7317.00.55.30	Galvanized	kg
Calculate duties for this HTS code
7317.00.55.40	Vinyl, resin or cement coated	kg
Calculate duties for this HTS code
7317.00.55.50	Other	kg
Calculate duties for this HTS code
	Other
7317.00.55.60	Not coated, plated or painted	kg
Calculate duties for this HTS code
	Coated, plated or painted
7317.00.55.70	Galvanized	kg
Calculate duties for this HTS code
7317.00.55.80	Vinyl, resin or cement coated	kg
Calculate duties for this HTS code
7317.00.55.90	Other	kg
Calculate duties for this HTS code
7317.00.65	Other		Free
7317.00.65.30	Cut	kg
Calculate duties for this HTS code
7317.00.65.60	Other	kg
Calculate duties for this HTS code
7317.00.75.00	Of two or more pieces	kg	Free
Calculate duties for this HTS code
7318	Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers (including spring washers) and similar articles, of iron or steel
	Threaded articles
7318.11.00.00	Coach screws	kg	12.5%	Free (, S,)
Calculate duties for this HTS code
7318.12.00.00	Other wood screws	kg	12.5%	Free (*,S,)
Calculate duties for this HTS code
7318.13.00	Screw hooks and screw rings		5.7%	Free (,S,)
7318.13.00.30	Having shanks or threads with a diameter of less than 6 mm	kg
Calculate duties for this HTS code
7318.13.00.60	Having shanks or threads with a diameter of 6 mm or more	kg
Calculate duties for this HTS code
7318.14	Self-tapping screws
7318.14.10	Having shanks or threads with a diameter of less than 6 mm		6.2%	Free (,S,) 3.1% ()
7318.14.10.30	Of stainless steel	kg
Calculate duties for this HTS code
7318.14.10.60	Other	kg
Calculate duties for this HTS code
7318.14.50	Having shanks or threads with a diameter of 6 mm or more		8.6%	Free (,S,) 4.3% ()
7318.14.50.20	Of stainless steel	kg
Calculate duties for this HTS code
7318.14.50.80	Other	kg
Calculate duties for this HTS code
7318.15	Other screws and bolts, whether or not with their nuts or washers
7318.15.20	Bolts and bolts and their nuts or washers entered or exported in the same shipment		Free
7318.15.20.10	Having shanks or threads with a diameter of less than 6 mm	kg
Calculate duties for this HTS code
	Having shanks or threads with a diameter of 6 mm or more
7318.15.20.20	Track bolts	kg
Calculate duties for this HTS code
7318.15.20.30	Structural bolts	kg
Calculate duties for this HTS code
	Bent bolts
7318.15.20.41	Right-angle anchor bolts	kg
Calculate duties for this HTS code
7318.15.20.46	Other	kg
Calculate duties for this HTS code
	Other
	With round heads
7318.15.20.51	Of stainless steel	kg
Calculate duties for this HTS code
7318.15.20.55	Other	kg
Calculate duties for this HTS code
	With hexagonal heads
7318.15.20.61	Of stainless steel	kg
Calculate duties for this HTS code
7318.15.20.65	Other	kg
Calculate duties for this HTS code
	Other
7318.15.20.91	Of stainless steel	kg
Calculate duties for this HTS code
7318.15.20.95	Other	kg
Calculate duties for this HTS code
7318.15.40.00	Machine screws 9.5 mm or more in length and 3.2 mm or more in diameter (not including cap screws)	kg	Free
Calculate duties for this HTS code
7318.15.50	Studs		Free
7318.15.50.30	Of stainless steel	kg
Calculate duties for this HTS code
	Other
	Continuously threaded rod
7318.15.50.51	Of alloy steel	kg
Calculate duties for this HTS code
7318.15.50.56	Other	kg
Calculate duties for this HTS code
7318.15.50.90	Other	kg
Calculate duties for this HTS code
	Other
7318.15.60	Having shanks or threads with a diameter of less than 6 mm		6.2%	Free (*,S,)
	Socket screws
7318.15.60.10	Of stainless steel	kg
Calculate duties for this HTS code
7318.15.60.40	Other	kg
Calculate duties for this HTS code
	Other
7318.15.60.70	Of stainless steel	kg
Calculate duties for this HTS code
7318.15.60.80	Other	kg
Calculate duties for this HTS code
7318.15.80	Having shanks or threads with a diameter of 6 mm or more		8.5%	Free (*,S,)
7318.15.80.20	Set screws	kg
Calculate duties for this HTS code
	Other
	Socket screws
7318.15.80.30	Of stainless steel	kg
Calculate duties for this HTS code
7318.15.80.45	Other	kg
Calculate duties for this HTS code
	Other
	With hexagonal heads
7318.15.80.55	Of stainless steel	kg
Calculate duties for this HTS code
	Other
7318.15.80.66	Cap screws	kg
Calculate duties for this HTS code
7318.15.80.69	Other	kg
Calculate duties for this HTS code
	Other
7318.15.80.82	Of stainless steel	kg
Calculate duties for this HTS code
7318.15.80.85	Other	kg
Calculate duties for this HTS code
7318.16.00	Nuts		Free
	Lugnuts
7318.16.00.15	Non-locking chrome-plated	kg
Calculate duties for this HTS code
7318.16.00.30	Locking	kg
Calculate duties for this HTS code
7318.16.00.45	Other	kg
Calculate duties for this HTS code
	Other
7318.16.00.60	Of stainless steel	kg
Calculate duties for this HTS code
7318.16.00.85	Other	kg
Calculate duties for this HTS code
7318.19.00.00	Other	kg	5.7%	Free (*,S,) 2.85% ()
Calculate duties for this HTS code
	Non-threaded articles
7318.21.00	Spring washers and other lock washers		5.8%	Free (,S,) 2.9% ()
7318.21.00.30	Helical spring lock washers	kg
Calculate duties for this HTS code
7318.21.00.90	Other	kg
Calculate duties for this HTS code
7318.22.00.00	Other washers	kg	Free
Calculate duties for this HTS code
7318.23.00.00	Rivets	kg	Free
Calculate duties for this HTS code
7318.24.00.00	Cotters and cotter pins	kg	3.8%	Free (,JS,)
Calculate duties for this HTS code
7318.29.00.00	Other	kg	2.8%	Free (,JS,)
Calculate duties for this HTS code
7319	Sewing needles, knitting needles, bodkins, crochet hooks, embroidery stilettos and similar articles for use in the hand, of iron or steel; safety pins and other pins of iron or steel, not elsewhere specified or included
7319.40	Safety pins and other pins
7319.40.20	Safety pins		4.5%	Free (,S,)
7319.40.20.10	On cards	gross
Calculate duties for this HTS code
7319.40.20.50	Other	gross
Calculate duties for this HTS code
7319.40.30.00	Dressmakers' or common pins	kg	4.1%	Free (,S,)
Calculate duties for this HTS code
7319.40.50	Other		Free
7319.40.50.10	Push pins	kg
Calculate duties for this HTS code
7319.40.50.50	Other	kg
Calculate duties for this HTS code
7319.90	Other
7319.90.10.00	Sewing, darning or embroidery needles	thousands	Free
Calculate duties for this HTS code
7319.90.90.00	Other	No.	2.9%	Free (,S,)
Calculate duties for this HTS code
7320	Springs and leaves for springs, of iron or steel
7320.10	Leaf springs and leaves therefor
	Suitable for motor vehicle suspension
7320.10.30.00	To be used in motor vehicles having a G.V.W. not exceeding 4 metric tons	kg	3.2%	Free (*,S,)
Calculate duties for this HTS code
7320.10.60	Other		3.2%	Free (, S,)
7320.10.60.15	Leaf springs having individual leaves with a thickness of 1.6 mm or more and leaves therefor	kg
Calculate duties for this HTS code
7320.10.60.60	Other	kg
Calculate duties for this HTS code
7320.10.90	Other		3.2%	Free (*,JS,)
7320.10.90.15	Leaf springs having individual leaves with a thickness of 1.6 mm or more and leaves therefor	kg
Calculate duties for this HTS code
7320.10.90.60	Other	kg
Calculate duties for this HTS code
7320.20	Helical springs
7320.20.10.00	Suitable for motor-vehicle suspension	kg	3.2%	Free (,S,)
Calculate duties for this HTS code
7320.20.50	Other		3.9%	Free (,S,)
	Helical springs, of wire having a cross-sectional dimension of less than 5.1 mm:
7320.20.50.10	Suitable for use in mattress supports and mattresses of heading 9404	kg
Calculate duties for this HTS code
7320.20.50.20	Other	kg
Calculate duties for this HTS code
7320.20.50.45	Helical springs, of wire having a cross-sectional dimension of 5.1 mm or more but less than 12.7 mm	kg
Calculate duties for this HTS code
7320.20.50.60	Other	kg
Calculate duties for this HTS code
7320.90	Other
7320.90.10.00	Hairsprings	kg	Free
Calculate duties for this HTS code
7320.90.50	Other		2.9%	Free (*,JS,)
	Of wire
7320.90.50.10	Suitable for use in mattress supports and mattresses of heading 9404	kg
Calculate duties for this HTS code
7320.90.50.20	Other	kg
Calculate duties for this HTS code
7320.90.50.60	Other	kg
Calculate duties for this HTS code
7321	Stoves, ranges, grates, cookers (including those with subsidiary boilers for central heating), barbecues, braziers, gas rings, plate warmers and similar nonelectric domestic appliances, and parts thereof, of iron or steel
	Cooking appliances and plate warmers
7321.11	For gas fuel or for both gas and other fuels
7321.11.10	Portable		5.7%	Free (,S,)
7321.11.10.30	Stoves or ranges	No.
Calculate duties for this HTS code
7321.11.10.60	Other	No.
Calculate duties for this HTS code
	Other
7321.11.30	Stoves or ranges		Free
7321.11.30.10	Of a maximum width not exceeding 70 centimeters	No.
Calculate duties for this HTS code
7321.11.30.20	Of a maximum width exceeding 70 but not exceeding 80 centimeters	No.
Calculate duties for this HTS code
7321.11.30.50	Of a maximum width exceeding 80 centimeters	No.
Calculate duties for this HTS code
7321.11.60.00	Other	No.	Free
Calculate duties for this HTS code
7321.12.00.00	For liquid fuel	No.	Free
Calculate duties for this HTS code
7321.19.00	Other, including appliances for solid fuel		Free
	Portable
7321.19.00.20	Hibachis	No.
Calculate duties for this HTS code
7321.19.00.40	Other	No.
Calculate duties for this HTS code
	Other
7321.19.00.60	Of cast iron	No.
Calculate duties for this HTS code
7321.19.00.80	Other	No.
Calculate duties for this HTS code
	Other appliances
7321.81	For gas fuel or for both gas and other fuels
7321.81.10.00	Portable	No.	2.9%	Free (*,S,)
Calculate duties for this HTS code
7321.81.50.00	Other	No.	Free
Calculate duties for this HTS code
7321.82	For liquid fuel
7321.82.10.00	Portable	No.	2.9%	Free (,S,)
Calculate duties for this HTS code
7321.82.50.00	Other	No.	Free
Calculate duties for this HTS code
7321.89.00	Other, including appliances for solid fuel		Free
7321.89.00.10	Fireplace grates of cast iron	No.
Calculate duties for this HTS code
7321.89.00.50	Other	No.
Calculate duties for this HTS code
7321.90	Parts
	Of articles in subheading 7321.11.30
7321.90.10.00	Cooking chambers, whether or not assembled	No., kg	Free
Calculate duties for this HTS code
7321.90.20.00	Top surface panels with or without burners or controls	No., kg	Free
Calculate duties for this HTS code
7321.90.40.00	Door assemblies, incorporating more than one of the following: inner panel, outer panel, window, insulation	No., kg	Free
Calculate duties for this HTS code
7321.90.50.00	Other	No., kg	Free
Calculate duties for this HTS code
7321.90.60	Other		Free
	Of cooking appliances and plate warmers
7321.90.60.40	Shelving and racks for cooking ovens	No., kg
Calculate duties for this HTS code
7321.90.60.60	Other	No., kg
Calculate duties for this HTS code
7321.90.60.90	Other	No., kg
Calculate duties for this HTS code
7322	Radiators for central heating, not electrically heated, and parts thereof, of iron or steel; air heaters and hot air distributors (including distributors which can also distribute fresh or conditioned air), not electrically heated, incorporating a motor-driven fan or blower, and parts thereof, of iron or steel
	Radiators and parts thereof
7322.11.00.00	Of cast iron	No.	Free
Calculate duties for this HTS code
7322.19.00.00	Other	No.	Free
Calculate duties for this HTS code
7322.90.00	Other, including parts		Free
7322.90.00.15	Air heaters, not electrically heated, incorporating a motor-driven fan or blower	No., kg
Calculate duties for this HTS code
7322.90.00.30	Hot air distributors, not electrically heated, incorporating a motor-driven fan or blower	No., kg
Calculate duties for this HTS code
7322.90.00.45	Parts of air heaters and hot air distributors	No.
Calculate duties for this HTS code
7323	Table, kitchen or other household articles and parts thereof, of iron or steel; iron or steel wool; pot scourers and scouring or polishing pads, gloves and the like, of iron or steel
7323.10.00.00	Iron or steel wool; pot scourers and scouring or polishing pads, gloves and the like	kg	Free
Calculate duties for this HTS code
	Other
7323.91	Of cast iron, not enameled
7323.91.10.00	Coated or plated with precious metal	No., kg	Free
Calculate duties for this HTS code
7323.91.50	Other		5.3%	Free (*,S,)
7323.91.50.20	Bakeware (cookware not suitable for stove top use)	No., kg
Calculate duties for this HTS code
7323.91.50.40	Other	No., kg
Calculate duties for this HTS code
7323.92.00	Of cast iron, enameled		Free
7323.92.00.20	Bakeware (cookware not suitable for stove top use)	No., kg
Calculate duties for this HTS code
7323.92.00.40	Other	No., kg
Calculate duties for this HTS code
7323.93.00	Of stainless steel		2%	Free (*,S,)
	Cooking and kitchen ware
7323.93.00.15	Teakettles	No., kg
Calculate duties for this HTS code
	Other
	Cooking ware
7323.93.00.35	Bakeware (cookware not suitable for stove top use)	No., kg
Calculate duties for this HTS code
7323.93.00.45	Other	No., kg
Calculate duties for this HTS code
7323.93.00.60	Kitchen ware	No., kg
Calculate duties for this HTS code
7323.93.00.80	Other	No., kg
Calculate duties for this HTS code
7323.94.00	Of iron (other than cast iron) or steel, enameled		2.7%	Free (,S,)
	Cooking and kitchen ware
	Of steel
7323.94.00.10	Teakettles	No., kg
Calculate duties for this HTS code
	Other
	Cooking ware
7323.94.00.21	Bakeware (cookware not suitable for stove top use)	No., kg
Calculate duties for this HTS code
7323.94.00.26	Other	No., kg
Calculate duties for this HTS code
7323.94.00.30	Kitchen ware	No., kg
Calculate duties for this HTS code
7323.94.00.40	Other	No., kg
Calculate duties for this HTS code
7323.94.00.80	Other	No., kg
Calculate duties for this HTS code
7323.99	Other
	Coated or plated with precious metal
7323.99.10.00	Coated or plated with silver	No., kg	Free
Calculate duties for this HTS code
7323.99.30.00	Other	No., kg	8.2%	Free (*,S,)
Calculate duties for this HTS code
	Not coated or plated with precious metal
7323.99.50	Of tinplate		Free
7323.99.50.30	Kitchen or tableware suitable for food or drink contact	No., kg
Calculate duties for this HTS code
7323.99.50.60	Other	No., kg
Calculate duties for this HTS code
	Other
7323.99.70.00	Cookingware	No., kg	5.3%	Free (*,S,)
Calculate duties for this HTS code
7323.99.90	Other		3.4%	Free (*,S,)
7323.99.90.30	Kitchen or tableware suitable for food or drink contact	No., kg
Calculate duties for this HTS code
7323.99.90.40	Gates for confining children or pets	No.
Calculate duties for this HTS code
7323.99.90.80	Other	No.
Calculate duties for this HTS code
7324	Sanitary ware and parts thereof, of iron or steel
7324.10.00	Sinks and wash basins, of stainless steel		3.4%	Free (*,S,)
7324.10.00.10	Stainless steel sinks with one or more drawn bowls (basins)	No.
Calculate duties for this HTS code
7324.10.00.50	Other	No.
Calculate duties for this HTS code
	Baths
7324.21	Of cast iron, whether or not enamelled
7324.21.10.00	Coated or plated with precious metal	No.	Free
Calculate duties for this HTS code
7324.21.50.00	Other	No.	Free
Calculate duties for this HTS code
7324.29.00.00	Other	No.	Free
Calculate duties for this HTS code
7324.90.00.00	Other, including parts	No.	Free
Calculate duties for this HTS code
7325	Other cast articles of iron or steel
7325.10.00	Of nonmalleable cast iron		Free
7325.10.00.10	Manhole covers, rings and frames	kg
Calculate duties for this HTS code
7325.10.00.20	Catch basins, grates and frames	kg
Calculate duties for this HTS code
7325.10.00.25	Cleanout covers and frames	kg
Calculate duties for this HTS code
7325.10.00.30	Valve and service boxes	kg
Calculate duties for this HTS code
7325.10.00.35	Meter boxes	kg
Calculate duties for this HTS code
7325.10.00.80	Other	kg
Calculate duties for this HTS code
	Other
7325.91.00.00	Grinding balls and similar articles for mills	kg	2.9%	Free (,S,)
Calculate duties for this HTS code
7325.99	Other
7325.99.10.00	Of cast iron	kg	Free
Calculate duties for this HTS code
7325.99.50.00	Other	kg	2.9%	Free (,S,)
Calculate duties for this HTS code
7326	Other articles of iron or steel
	Forged or stamped, but not further worked
7326.11.00.00	Grinding balls and similar articles for mills	kg	Free
Calculate duties for this HTS code
7326.19.00	Other		2.9%	Free (,S,)
7326.19.00.10	Forged	kg
Calculate duties for this HTS code
7326.19.00.80	Other	kg
Calculate duties for this HTS code
7326.20.00	Articles of iron or steel wire		3.9%	Free (,S,)
7326.20.00.10	Belts and belting	kg
Calculate duties for this HTS code
7326.20.00.20	Garment hangers	No.
Calculate duties for this HTS code
7326.20.00.30	Sod staples, U staples, irrigation staples, ground staples, and ground pins	No.
Calculate duties for this HTS code
7326.20.00.40	Double loop bar ties and double loop wire ties	No.
Calculate duties for this HTS code
7326.20.00.55	Paint roller frames	No.
Calculate duties for this HTS code
7326.20.00.90	Other	No.
Calculate duties for this HTS code
7326.90	Other
7326.90.10.00	Of tinplate	No., kg	Free
Calculate duties for this HTS code
	Other
7326.90.25.00	Cable or inner wire for caliper and cantilever brakes and casing therefor, whether or not cut to length	kg	Free
Calculate duties for this HTS code
7326.90.35.00	Containers of a kind normally carried on the person, in the pocket or in the handbag	doz.	7.8%	Free (, S,)
Calculate duties for this HTS code
7326.90.45.00	Horse and mule shoes	kg	Free
Calculate duties for this HTS code
	Other
7326.90.60.00	Coated or plated with precious metal	No., kg	8.6%	Free (,S,)
Calculate duties for this HTS code
7326.90.86	Other		2.9%	Free (,JS,)
7326.90.86.05	Rods for electrical grounding	kg
Calculate duties for this HTS code
7326.90.86.10	Laminated goods consisting of two or more flat-rolled sheets of iron or steel held together with an adhesive or having a core of non-metallic material	kg
Calculate duties for this HTS code
7326.90.86.30	Hangers and similar supports for tubes and pipes	kg
Calculate duties for this HTS code
7326.90.86.35	Fence posts, studded with corrugations, knobs, studs, notches or similar protrusions, with or without anchor plates	kg
Calculate duties for this HTS code
7326.90.86.45	Barbed tape	kg
Calculate duties for this HTS code
7326.90.86.60	Ladders	No.
Calculate duties for this HTS code
7326.90.86.75	Paint roller frames (other than of iron or steel wire)	No.
Calculate duties for this HTS code
7326.90.86.76	Metal handles for brooms, mops, paint applicators and similar products	No.
Calculate duties for this HTS code
7326.90.86.77	Burial caskets	No.
Calculate duties for this HTS code
7326.90.86.88	Other	kg
Calculate duties for this HTS code

No results

Harmonized System Code (HS) Lookup & Finder

HS Code 73

U.S. Tariff Rates

Join our newsletter to stay up to date on the latest disruptions, rates, and market shifts.

Harmonized System Code (HS) Lookup & Finder

HS Code 73

U.S. Tariff Rates

Calculate and analyze tariff impacts in real time

You're all set